• PPE: Wear safety helmets, gloves, and non-slip boots.
• Electrical: Ensure all DC/AC breakers are in the "OFF" position before connections.
• Wind Rating: Do not deploy the solar array if wind speeds exceed 20m/s.
• Grounding: Ensure the container chassis is properly grounded.

Phase 1: Site Preparation
Choose flat ground with max sun exposure. Use adjustable outriggers to level the container.

Phase 2: Structural Deployment
Install heavy-duty sliding tracks. Release safety locks and unfold solar frames using the hydraulic system. Secure with wind-bracing struts.

Phase 3: Electrical Commissioning
Connect MC4 connectors to the Combiner Box. Verify LiFePO4 modules and BMS communication. Power on sequence: Battery Breaker -> MPPT Controller -> AC Inverter.